Views: 0 Author: Site Editor Publish Time: 2024-03-27 Origin: Site
1. Silk screen aluminum oxide dyeing mark Aluminum oxide mark, the surface is strong and smooth, wear-resistant and durable.After aluminum oxide signs and panels are sealed by oxidation, there is an oxide film on the outside, making the surface solid and lubricated.Screen printing with ordinary inks often creates force differences and should be paid special attention to.To solve this problem, first remove the screen ink and handling issues.
a. Silk screen aluminum oxide dyeing mark Aluminum oxide mark, the surface is strong and smooth, wear-resistant and durable.
After aluminum oxide signs and panels are sealed by oxidation, there is an oxide film on the outside, making the surface solid and lubricated.Screen printing with ordinary inks often creates force differences and should be paid special attention to.To solve this problem, first remove the screen ink and handling issues.The use of alumina screen printing ink is the key to solving the adhesion and firmness problems of the ink film in aluminum screen printing.This ink is different from ordinary ink.It adheres firmly to aluminum panels and has good light resistance.It is a fantasy ink for screen printing aluminum anodized labels.
b. The wire mesh convex and concave color aluminum sign convex and concave signs are characterized by painting on the concave surface, which has good wear resistance and three-dimensional effect. It is mainly used for mechanical nameplates and company plaques.The traditional manufacturing method is to paint the etched grooves by hand (or paint with a needle) and then trim it by hand to remove residual paint.This method is not only time-consuming and inefficient, requiring skilled operators, but the signs produced are often unclear, the handwriting is deformed, and the quality is unstable.Therefore, it is limited to manufacturing some signs with small batches, low color numbers, low quality requirements and very simple patterns.
Screen sandblasting oxidation inlaid aluminum label screen sandblasting oxidation paint signage process is a traditional sign manufacturing process.The surface of this product is snow white, with high hardness and good wear resistance.
Wire Mesh Wood from Aluminum Oxide Sign Water White Aluminum Oxide Sign is a new type of matte sub-surface sign that has recently appeared in China.The appearance of this sign is milky white, bright and smooth, without embossing, and is resistant to heat and humidity, salt spray and mold.It also has strong properties of light resistance, abrasion resistance and resistance to organic solvents.It is used for frequent wiping.The machines and tasks are in the same situation as the worst case.What's more valuable is that the production process of screen printing water-white alumina labels is low, the work efficiency is high, and there is no 'three wastes' at all.Manpower and power (including water and electricity) shall not exceed one-third of the traditional erosion mark.
Printed aluminum oxidation color signs Aluminum flat anodized signs are one of the more common signs.It has the characteristics of beautiful appearance, brightness, high hardness and good wear resistance.In the past, the process was aluminum plate punching, mechanical polishing, chemical polishing and oxidation; direct processing of silk screen, zinc bismuth white thick paint and alkyd varnish for maintenance printing; coloring with dyeing.This process does not control screen printing, and has the disadvantages of large amounts of materials, complex processes, low printing resistance, poor resolution, and high cost.On the premise of existing skills, a new process with relatively simple procedures, good quality and high efficiency can be developed.The new process uses non-toxic diazo photosensitive adhesive to directly make screen printing plates.The theory proves that it can meet the requirements of fast plate making, high resolution, high printing durability and less material.In addition, the processes of printing maintenance, dyeing and printing materials can be combined into one, that is, water-based dyeing printing materials are directly dyed and continuously colored, without the need for color cylinders.This greatly simplifies the entire process flow and operating steps, and proposes a new method of flat oxidation dyeing signs.High-gloss three-dimensional embossed aluminum signs have always followed the production technology and people's material and energy advancement. People not only have higher requirements for the function of the product, but also put forward higher requirements for the shape and installation of the product.Especially with the development of the national watch market economy, external business is expanding from time to time, and people have higher and higher requirements for product functions and quality.In order to improve the market competitiveness of products, high-gloss three-dimensional relief logos have been widely used.
Home / Products / Why OLAT / Manufacturing / Application / Support / News / Contact Us / privacy policy