Several common problems and solutions of printing processing

In the process of printing and processing, a lot of conditions will occur, resulting in product quality problems. Kunshan Olet printing industrial equipment printing processing plant has sorted out several common situations and solutions about printing processing:

1.The design of the printing pattern is not clear enough or the resolution is not high enough, which ensures that the design of the printing pattern is high resolution, the details are clear, and matches the surface of the printing pad or printing material.

2.The improper selection of the pad, the hardness, shape and surface texture of the pad will affect the printing quality. To select the suitable mat, determine the hardness and shape according to the desired printing effect, and ensure that the texture of the mat surface matches the printed pattern.

3.The improper use of printing scraper, scraper is one of the key role in the process of printing tools. The hardness, angle and pressure of the scraper all affect the printing results. Ensure that the scraper is rigid for the printed material, properly angle, and uniform pressure is applied.

4.The surface treatment of the printing material is improper, the surface of the printing material should be clean, smooth, and free of dust, grease or other pollutants. Before printing, detergent or special surface treatment agents can be used to clean and prepare material surfaces.

Of course, if there is a margin problem, Huizhou Hui printing factory suggests that you can try the following solutions: 

1.Adjust the design and resolution of the printing pattern to ensure that the pattern is clearly visible.

2.Change the suitable printing pad, and choose the hardness, shape and surface texture that match the printing material.

3.Check the use of the seal scraper to ensure that the hardness, Angle and pressure of the scraper are appropriate.

4.Clean and prepare the surface of the printed materials to ensure that they are clean, smooth, and free of contaminants.

5.Adjust the parameters in the printing process, such as printing speed, pressure and temperature, to obtain a better printing effect.